EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Pó AISI 2507 para impressão 3D
Metal 3D printing, also known as metal additive manufacturing, is an advanced fabrication technique that involves layer-by-layer deposition of metal powder or metal wire material, which is then melted using a heat source such as a laser beam or an electron beam. This process allows for the rapid creation of metal parts. Compared to traditional manufacturing methods, metal 3D printing offers advantages in terms of efficiency, versatility, and precision, leading to its widespread application in industries such as aerospace, automotive manufacturing, and medical devices.
AISI 2507, also known as duplex stainless steel, is a material known for its excellent corrosion resistance, high strength, and good weldability.
Descrição
Metal 3D printing, also known as metal additive manufacturing, is an advanced fabrication technique that involves layer-by-layer deposition of metal powder or metal wire material, which is then melted using a heat source such as a laser beam or an electron beam. This process allows for the rapid creation of metal parts. Compared to traditional manufacturing methods, metal 3D printing offers advantages in terms of efficiency, versatility, and precision, leading to its widespread application in industries such as aerospace, automotive manufacturing, and medical devices.
AISI 2507, also known as duplex stainless steel, is a material known for its excellent corrosion resistance, high strength, and good weldability.
Informações Gerais
| Lugar de origem: | Changsha, China |
| marca: | HLPOWDER |
| Item: | AISI 2507 |
| Tamanho das partículas: | 15-53μm/ 15-45μm |
| Certificação: | ISO9001, ISO14001 |
| Quantidade mínima: | 20kg |
| Detalhes da embalagem: | Barril de ferro |
| Tempo de entrega: | dias 7-10 |
Aplicações
● Chemical and Petrochemical Industry
● Offshore and Marine Engineering
● Indústria de Petróleo e Gás
● Dispositivos Médicos
● Indústria aeroespacial
● Indústria de energia
● Construção e Engenharia Estrutural
Especificações
Composição química:
| Liga | Cr | Ni | Mo | Cu | Si | Mn | N | C | Fe |
|
AISI 2507 |
24.00-26.00 | 6.00-8.00 | 3.50-4.50 | ≤ 0.50 | ≤ 1.00 | ≤ 2.00 | 0.24-0.35 | ≤ 0.03 | Bal |
Granulomeria:
| Tamanho da partícula | Sensibilidade ao toque | Fluidez | Distribuição de tamanho de partícula | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥4.5 | ≤ 20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥4.5 | ≤ 20 | 16-26 | 30-38 | 52-58 |
Características do pó
● High Sphericity& High flowability.
● Low oxygen content.
● The Oxygen content is under 600PPM.
● Narrow Particle Size Distribution.
Pacote
Para impressão 3D: Cada embalagem de PE + latas de 20 kg ou tambor de ferro de 25 kg/50 kg ou tambor de ferro de 250 kg.
